NETBIOS HACKING Part2

Netbios Hacking Part2.
The first step is to identify a target computer. Click here!

Step2. Trial and Error

Now, we don’t know if we have our designated target, or if we have a computer or printer, or whatever else is on the LAN or WAN (refer to the previous post to get more info about LAN and WAN). If you did get the IP of the target though, I still recommend reading through this section, for it could be helpful later on. Click on the start menu and go to run, type in cmd, and click ok. This should bring up the command prompt. From here we will do most of the hacking. Now I will be referring to certain commands that need to be inputted into the command prompt. I will put these commands in quotes, but do not put the quotes in the code when you type it into the prompt. I am only doing this to avoid confusion. Let’s get back to the hacking. Type in “ping (IP address of the target).” 


For example in this tutorial, “ping 192.168.1.103.” This will tell us if the target is online. If it worked, it will look something like this (note, I have colored out private information):

IF it didn’t work, meaning that the target is not online, it will look something like this:

If the target is not online, either switch to a different target, or try another time. If the target is online, then we can proceed.


At this stage it's getting very interesting. The next step is to "Gather information". Information is the key! 

NETBIOS HACKING Part1

NetBIOSHacking

For this tutorial, I used Microsoft’s Windows XP Home Edition OS.

-What is it?

NetBIOS Hacking is the art of hacking into someone else’s computer through your computer. NetBIOS stands for “Network Basic Input Output System.” It is a way for a LAN or WAN to share folders, files, drives, and printers.

-How can this be of use to me?
Most people don’t even know, but when they’re on a LAN or WAN they could possibly have their entire hard drive shared and not even know. So if we can find a way into the network, their computer is at our disposal.

-What do I need?
Windows OS
Cain and Abel >>>Get it here:  www.oxid.it/cain.html 

Step1: How to Find the Target?

So first of all, we need to find a computer to hack into. So if you are plugged in to the LAN, or connected to the WAN, you can begin. Open up Cain and Abel. This program has a built in sniffer feature. A sniffer looks for all IP addresses in the local subnet. Once you have opened up the program click on the sniffer tab, click the Start/Stop sniffer, and then click the blue cross

Another window will pop up, make sure “All host in my subnet” is selected, and then click ok.

It should begin to scan.

Then IP’s, computer names, and mac addresses will show up. Now remember the IP address of the computer you are going to be breaking into. If you can’t tell whether the IP address is a computer, router, modem, etc, that’s ok. During the next step we will begin our trial and error.

Thanks for following us! I hope you've enjoyed it.

Success is a Process!: Hacking Websites

Success is a Process!: Hacking Websites: Hacking Websites There are many ways to hack a website . Some are more efficient, some are just useless. In this series, we are going to...